Product number
N-9701
Introduction
Super soft hand feeling, rounded corners and bright surface effect, 500% elasticity coefficient, suitable for printing on soft hand feeling or thin fabric printing, suitable for printing on skin-contacting fabrics, soft and comfortable, can be directly used for color mixing or matched with other RG series silicone Used together, it can also be used as a gloss cover.
Solid content: 100%
Color: transparent
Viscosity: 70,000mPa s
Status: Flowable paste
Odor: Odorless
Screen and scraper requirements
Dilute the silica gel appropriately, and use a screen with a size of 350 mesh or more;
Suitable for both water-based and oil-based scrapers
use
1. It can be used as a primer for fabrics with good water absorption and a certain degree of elasticity;
2. It can be used to color elastic fabrics, or directly print bright rounded corners;
3. The silica gel is mixed in any proportion;
4. Silicone weather resistance, low temperature can withstand -50 ℃, high temperature can withstand 280 ℃;
How to add additives
According to the temperature of the operating area, baking temperature and time, choose to add 2-6% RG-B80. If you need to avoid baking, you can choose natural dry silica gel.
How to cure
1. Free baking can choose natural dry type silica gel, add 2% G-9010, it can be naturally surface-dried;
2. Baking temperature 100-120℃, add 2-6% G-9010;
3. The silica gel will be completely cured within 48 hours after the operation is completed, and the fastness will be the best;