The salesperson received customer feedback from a printing factory in Humen today. The digital primer white glue was very bad in anti-adhesion. The customers pressed the fabric with their hands, and the fastness was very poor. It fell off, and the customer repeatedly said that his fabric had been there for a few days, and it must have been completely dry. It is your slurry that has problems.
Analysis of digital direct injection printing operation process in printing factory
1.Print 3 times with Normant digital base white paste
2.After printing, place at room temperature for 24 hours
3.After 24 hours, the customer presses with the press
Customer test fastness is bad, anti-sticking is serious.
Normant engineer analysis:
After receiving the customer's fabric, the Norman engineer performed and tested
Touch the fabric with your hand to make sure that the fabric is not dry.
1.Dry wipe to reach level 4
2. Made 5KG method code without pressure sticking for 24 hours
3. After doing 60-degree washing for 3 hours, no fastness appears.
4. Scrape normally with your fingers without discoloration.
It can be concluded that the customer performed the test because the fabric did not dry out
Now analyze the weather in Dongguan these days, the clothes can't be dried out outside, it is very humid for a few days.
As a result, problems that are prone to dryness and sticky hands can occur.
CATEGORIES
- Company new
- Technical Description
- Digital printing
- printing-silicone
- Printing design
- hot stamping foil
- plastisol inks
Latest news
- Special printing and special printing
- How to reduce printing times and impro
- Are the cheap printing materials on th
- How to improve the flatness of screen
- Elastic round corner printing silicone
- Underwear printing silicone
Contact us
- ADD: Dongguan,Guangdong,China
- TEL: 0086-137 1295 8399
- FAX: 0086-0769-82930900
- E-mail: 999ctw@gmail.com