S5 machine-printed thick board paste 3D stereoscopic effect of screen printing

S5 machine-printed thick board paste 3D stereoscopic effect of screen printing
Introduction: Introduction

This product is a right-angle thick plate printing paste developed by the company in response to the market's three-dimensional effect printing requirements. It solves the problems of not thick three-dimensional thick plate printing piles, uneven corners and excessive printing times.

1. Performance: performance

Appearance: transparent and white

Characteristics: The surface is smooth, thick and fast, with tension, good resilience, easy to operate, and the surface is dry and non-sticky. It is recommended that the reverse side be overheated after printing.

1. Viscosity: 135000~145000cps;

2. Ionicity: non-ionic;

3. Storage period: one year (normal temperature, sealed).

2. Application: Apply

1. This product is mainly used for three-dimensional thick printing of high-grade nylon fabric, milk silk, swimsuit fabric, sportswear, polyester fabric, knitted cotton fabric, cotton spandex fabric, etc. It has good thickness, soft feel, non-stick, strong three-dimensional sense and Easy to adjust and other advantages.

2. This product generally uses 80-mesh and 120-mesh wire mesh, which must be tight according to different patterns, which is very critical;

3. This product is not easy to plug the net, when it is too thick, it can be diluted by adding an appropriate amount of water slurry to stir evenly;

4. In order to ensure the printing effect, generally need to print 5-8 times according to different thickness;

5. The product is easy to operate. It is generally recommended to use the flat screen (common screen) directly, without the need to make a thick version; when using thick screen printing, the second printing needs to be dried after the first printing. ;

6. After 72 hours of natural air drying, over-temperature 150 degrees/15-30 seconds, try to pass the fabric over the reverse side when over-temperature;

7. If you need to improve the fastness, you can add 1% catalyst or crosslinking agent.

8. Suitable for: handprint, oval printing machine printing, treadmill printing machine printing, etc.